Lockstitch machine OLISEW OL-1510N-L14 with 1 needle
You are here:
- » Home page
- » Machines for heavy sewing
- » Long arm machines single needle
- » Lockstitch machine OLISEW OL-1510N-L14 with 1 needle
Description
Lockstitch machine OLISEW OL-1510N-L14 with 1 needle. Machine is destined for heavy material sewing such as leather, car and furniture upholstery. Long arm with working area (from needle to body of the machine) is 360 mm length. Parameters: maximum sewing speed 2000 spm, maximum length of stitch is 9 mm (in case of forward and backward sewing), height of foot lifting is 16 mm, needle system is 135x17, thickness of needle is 125-180 Nm. The model is equipped with mechanism protecting the hook and needle against any damage. In comparison with standard one, the hook is larger about 30%. It is especially useful in case of sewing with thick thread. There is system of lubrication of hook and regulating dial which set the height of inside walking foot according to sewn material. The switch located near needle bar turns on the function of bartacking while sewing. Servo motor 750W is equipped with: positioning function, pneumatic foot lifting back bartacking.
For this model of machine JUKI parts are suitable.
We offer mounted, ready for work set that includes:
Head of the machine
Stand and top table
Motor
Drawer
Additional accessories
Manual operating
Technical parameters:
| Type of stitch | flat lockstitch |
| Type of transport | compound |
| Direct-drive | no |
| Maximum length of stitch | 9 mm |
| Maximum speed | 2000 spm |
| Maximum foot lifting | 16 mm |
| Stroke of needle | 36 mm |
| Size of hook | enlarged |
| Type of lubrication | open |
| System of lubrication | automatic |
| Needle positioning | yes |
| Automatic thread cutting | no |
| Pneumatic foot lifting | yes |
| Pneumatic bartacking | yes |
| Automatic walking foot | no |
| Automatic wiper | no |
| Automatic nipper | no |
| Control panel | no |
| Needle system | DPx17 |
| Clearance under the arm | 360 mm |
| Energy-saving servo motor | yes |
